WELSH MADE

Nori Feeder – Honeycomb Seaweed Feeder with Suction Mount


Price:
Sale price£4.95
Nori Sheets: Feeder only
Stock:
Only 2 units left
Printed in Wales Designed and 3D printed by Reefphyto.
Reef-safe PETG Lightweight PETG body with an orange honeycomb cover.
Sliding cover Load nori outside the aquarium before attaching the feeder.
Suction mount Attach to clean, flat glass and check the cup is secure.
What you'll receive
  • One Reefphyto Nori Feeder with its suction cup fitted, ready to use
  • Orange honeycomb grid slides over the cream mesh to clamp the nori flat
  • Fish graze through the hexagons instead of tearing the sheet away
  • Suits tangs, rabbitfish, angelfish and other grazing herbivores
  • Reef-safe PETG, designed and 3D printed in our Welsh workshop
  • Darren's personal support by email if you want advice on feeding herbivores
Shipped within 1 to 2 working days via Royal Mail Tracked 24.

Description

Nori Feeder: Honeycomb Seaweed Feeder with Suction Mount

Most nori clips have the same problem.

Your tang grabs the sheet, gives one good shake, and the whole piece tears free. Half of it is eaten, the rest drifts round the tank, ends up in the overflow or settles into the rockwork to rot.

The Reefphyto Nori Feeder holds the sheet flat between two honeycomb panels, so your fish have to graze it the way they would graze algae on a reef: picking and rasping at it through the holes, a mouthful at a time.

Picture your tang working its way across the feeder, hexagon by hexagon, instead of snatching one bite and losing the rest to the filter sock.

I have been working in marine aquaculture for more than 18 years and I designed this feeder here in Wales. Each one is printed in reef-safe PETG in our own workshop.

Give your herbivores a proper grazing station and keep the nori where it belongs.

What the Nori Feeder Is

A flat feeding station in cream PETG with a bright orange honeycomb grid. The cream base has a fine honeycomb mesh. You lay a piece of nori on the mesh, slide the orange grid along its rails over the top, and the sheet is clamped in place. Your fish feed through the large hexagon openings in the orange grid.

One clear suction cup is fitted through the rounded end, so the feeder sticks to the inside of the glass at whatever height suits your fish. A small orange pull tab on the side of the grid makes it easy to slide open and closed, even with wet fingers.

Why a Honeycomb Grid

The two honeycomb panels support the nori across a wider area than a single clip, giving fish access through the openings. The feeder is designed to help keep the sheet in place while fish graze and reduce loose pieces. Some nori may still break free, depending on the sheet and how your fish feed.

Which Fish It Suits

Any fish that grazes plant matter: yellow tangs, blue tangs, kole tangs, naso tangs and other surgeonfish, foxface and other rabbitfish, angelfish that eat algae, and lawnmower blennies once they learn where it is. It is just as useful for getting a newly added tang feeding, because the nori stays in one place where the fish can find it every day.

Add Nori Sheets

Choose Feeder + 5 Nori Sheets in the option above and we will pack a bag of our Nori Seaweed Sheets with your feeder, so you can start feeding the day it arrives. Each large sheet gives you several feeds, depending on how many herbivores you keep.

Dimensions

  • Printed body: approximately 172 mm high × 72 mm wide.
  • Overall width with the sliding cover closed: approximately 79 mm, including the pull tab.

Body dimensions exclude the suction cup and screw cap. Leave space beside the feeder to slide the orange cover out for loading and cleaning.

How to Use It

Load the feeder outside the aquarium. Slide the orange grid out using the pull tab, lay a piece of nori on the front of the cream mesh, and slide the grid back over it. Scrape a patch of glass clean, then attach the loaded feeder inside the aquarium by pressing the suction cup firmly onto the glass, with the orange grid facing into the tank. Check that the feeder is secure before leaving it in place. Start with a piece about the size of your palm for one tang and scale up for a group. Remove anything left after two to four hours so it does not break down in the tank.

Cleaning

Slide your fingernail under the edge of the suction cup to release it, lift the feeder out, slide the grid off and rinse both parts in tank water. A soft brush clears any seaweed left in the honeycomb.

Building a herbivore feeding routine? Pair the feeder with our Nori Seaweed Sheets, and rotate in Premium Soft Algae Pellets and Algae Wafers for variety.

Nori Feeder FAQ

What is it made from?

Reef-safe PETG, printed in our workshop in Wales. The suction cup is a clear aquarium suction cup.

What is in the pack?

One Nori Feeder with its suction cup fitted and the orange grid in place. Choose "Feeder only" for the feeder on its own, or "Feeder + 5 Nori Sheets" to add a pack of 5 large nori sheets.

Can I use other seaweed in it?

Yes. Any flat dried seaweed sheet works, as long as it is thin enough for the orange grid to slide over it.

Where should I put it?

On any flat, clean pane of glass inside the tank, at a height where your herbivores already swim. Somewhere out of the strongest flow keeps the sheet steadier and makes it easier for the fish to graze.

Will it stay on the glass?

The suction cup works best on clean, flat glass. Press it firmly into place and check that the feeder is secure before use. Check the cup regularly. If it loosens, remove the feeder, rinse the cup and refit it on a freshly cleaned patch of glass.

If you are not sure how much nori your fish need, get in touch. Darren responds personally.

Shipping Details

Free delivery on orders of £65 or more to eligible postcodes. Orders under £65, delivery - Royal Mail 24 from £4.95.

Dispatch is on Mondays, Tuesdays and Thursdays, excluding bank holidays. Free Delivery orders are dispatched within 2–3 working days, on our scheduled dispatch days. Most orders arrive the next working day after dispatch, but delivery times are estimates.

For paid delivery, we normally dispatch orders placed before 12 noon on a dispatch day that day, subject to stock availability. Later orders go out on the next dispatch day.

See Shipping Information for the full list of postcode exclusions. View delivery rates and dispatch details.

Payment & Security

Payment methods

American Express Apple Pay Diners Club Discover Google Pay Klarna Maestro Mastercard Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


Security

Guaranteed safe checkout

Type your question here

You may also like

Recent Posts