{"product_id":"nori-feeder","title":"Nori Feeder – Honeycomb Seaweed Feeder with Suction Mount","description":"\u003cdiv class=\"rp-product-copy\"\u003e\n\u003ch2 class=\"h1\"\u003eNori Feeder: Honeycomb Seaweed Feeder with Suction Mount\u003c\/h2\u003e\n\u003cp\u003eMost nori clips have the same problem.\u003c\/p\u003e\n\u003cp\u003eYour tang grabs the sheet, gives one good shake, and the whole piece tears free. Half of it is eaten, the rest drifts round the tank, ends up in the overflow or settles into the rockwork to rot.\u003c\/p\u003e\n\u003cp\u003eThe Reefphyto Nori Feeder holds the sheet flat between two honeycomb panels, so your fish have to graze it the way they would graze algae on a reef: picking and rasping at it through the holes, a mouthful at a time.\u003c\/p\u003e\n\u003cp\u003ePicture your tang working its way across the feeder, hexagon by hexagon, instead of snatching one bite and losing the rest to the filter sock.\u003c\/p\u003e\n\u003cp\u003eI have been working in marine aquaculture for more than 18 years and I designed this feeder here in Wales. Each one is printed in reef-safe PETG in our own workshop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGive your herbivores a proper grazing station and keep the nori where it belongs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat the Nori Feeder Is\u003c\/h2\u003e\n\u003cp\u003eA flat feeding station in cream PETG with a bright orange honeycomb grid. The cream base has a fine honeycomb mesh. You lay a piece of nori on the mesh, slide the orange grid along its rails over the top, and the sheet is clamped in place. Your fish feed through the large hexagon openings in the orange grid.\u003c\/p\u003e\n\u003cp\u003eOne clear suction cup is fitted through the rounded end, so the feeder sticks to the inside of the glass at whatever height suits your fish. A small orange pull tab on the side of the grid makes it easy to slide open and closed, even with wet fingers.\u003c\/p\u003e\n\u003ch2\u003eWhy a Honeycomb Grid\u003c\/h2\u003e\n\u003cp\u003eThe two honeycomb panels support the nori across a wider area than a single clip, giving fish access through the openings. The feeder is designed to help keep the sheet in place while fish graze and reduce loose pieces. Some nori may still break free, depending on the sheet and how your fish feed.\u003c\/p\u003e\n\u003ch2\u003eWhich Fish It Suits\u003c\/h2\u003e\n\u003cp\u003eAny fish that grazes plant matter: yellow tangs, blue tangs, kole tangs, naso tangs and other surgeonfish, foxface and other rabbitfish, angelfish that eat algae, and lawnmower blennies once they learn where it is. It is just as useful for getting a newly added tang feeding, because the nori stays in one place where the fish can find it every day.\u003c\/p\u003e\n\u003ch2\u003eAdd Nori Sheets\u003c\/h2\u003e\n\u003cp\u003eChoose \u003cstrong\u003eFeeder + 5 Nori Sheets\u003c\/strong\u003e in the option above and we will pack a bag of our \u003ca href=\"\/products\/nori-seaweed-sheets-x-5\" title=\"Nori Seaweed Sheets\"\u003eNori Seaweed Sheets\u003c\/a\u003e with your feeder, so you can start feeding the day it arrives. Each large sheet gives you several feeds, depending on how many herbivores you keep.\u003c\/p\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrinted body: approximately 172 mm high × 72 mm wide.\u003c\/li\u003e\n\u003cli\u003eOverall width with the sliding cover closed: approximately 79 mm, including the pull tab.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBody dimensions exclude the suction cup and screw cap. Leave space beside the feeder to slide the orange cover out for loading and cleaning.\u003c\/p\u003e\n\u003ch2\u003eHow to Use It\u003c\/h2\u003e\n\u003cp\u003eLoad the feeder outside the aquarium. Slide the orange grid out using the pull tab, lay a piece of nori on the front of the cream mesh, and slide the grid back over it. Scrape a patch of glass clean, then attach the loaded feeder inside the aquarium by pressing the suction cup firmly onto the glass, with the orange grid facing into the tank. Check that the feeder is secure before leaving it in place. Start with a piece about the size of your palm for one tang and scale up for a group. Remove anything left after two to four hours so it does not break down in the tank.\u003c\/p\u003e\n\u003ch2\u003eCleaning\u003c\/h2\u003e\n\u003cp\u003eSlide your fingernail under the edge of the suction cup to release it, lift the feeder out, slide the grid off and rinse both parts in tank water. A soft brush clears any seaweed left in the honeycomb.\u003c\/p\u003e\n\u003cp\u003eBuilding a herbivore feeding routine? Pair the feeder with our \u003ca href=\"\/products\/nori-seaweed-sheets-x-5\" title=\"Nori Seaweed Sheets\"\u003eNori Seaweed Sheets\u003c\/a\u003e, and rotate in \u003ca href=\"\/products\/premium-soft-algae-pellets\" title=\"Premium Soft Algae Pellets\"\u003ePremium Soft Algae Pellets\u003c\/a\u003e and \u003ca href=\"\/products\/algae-wafers\" title=\"Reefphyto Algae Wafers\"\u003eAlgae Wafers\u003c\/a\u003e for variety.\u003c\/p\u003e\n\u003ch2\u003eNori Feeder FAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is it made from?\u003c\/h3\u003e\n\u003cp\u003eReef-safe PETG, printed in our workshop in Wales. The suction cup is a clear aquarium suction cup.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the pack?\u003c\/h3\u003e\n\u003cp\u003eOne Nori Feeder with its suction cup fitted and the orange grid in place. Choose \"Feeder only\" for the feeder on its own, or \"Feeder + 5 Nori Sheets\" to add a pack of 5 large nori sheets.\u003c\/p\u003e\n\u003ch3\u003eCan I use other seaweed in it?\u003c\/h3\u003e\n\u003cp\u003eYes. Any flat dried seaweed sheet works, as long as it is thin enough for the orange grid to slide over it.\u003c\/p\u003e\n\u003ch3\u003eWhere should I put it?\u003c\/h3\u003e\n\u003cp\u003eOn any flat, clean pane of glass inside the tank, at a height where your herbivores already swim. Somewhere out of the strongest flow keeps the sheet steadier and makes it easier for the fish to graze.\u003c\/p\u003e\n\u003ch3\u003eWill it stay on the glass?\u003c\/h3\u003e\n\u003cp\u003eThe suction cup works best on clean, flat glass. Press it firmly into place and check that the feeder is secure before use. Check the cup regularly. If it loosens, remove the feeder, rinse the cup and refit it on a freshly cleaned patch of glass.\u003c\/p\u003e\n\u003cp\u003eIf you are not sure how much nori your fish need, get in touch. Darren responds personally.\u003c\/p\u003e\n\u003c\/div\u003e\n","brand":"Reefphyto","offers":[{"title":"Feeder only","offer_id":60402591564160,"sku":"NORIFEED","price":4.95,"currency_code":"GBP","in_stock":true},{"title":"Feeder + 5 Nori Sheets","offer_id":60402616729984,"sku":"NORIFEED-NORI","price":10.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1202\/2604\/files\/reefphyto-nori-feeder-front.png?v=1794746166","url":"https:\/\/reefphyto.co.uk\/products\/nori-feeder","provider":"Reefphyto Ltd","version":"1.0","type":"link"}